Low Profile Dual Tone/Volume Knobs

Schematics, layouts & other technical mumbo jumbo.

Moderator: The Captain

Post Reply
User avatar
CraigBeckGuitar
Posts: 65
Joined: Thu Sep 26, 2019 3:18 pm

Low Profile Dual Tone/Volume Knobs

Post by CraigBeckGuitar »

Does anyone know of a source for Low Profile Dual Tone/Volume Knobs for Guitar. My current knobs are almost 1" high.
IMG_2888.jpg
IMG_2888.jpg (24.75 KiB) Viewed 412 times
BKDevices
Posts: 7
Joined: Sun May 15, 2022 2:01 am

Re: Low Profile Dual Tone/Volume Knobs

Post by BKDevices »

Do you have a pot these are going on already? If so, what are the shaft diameters? There are various options out there for dual concentrics (6.4/3.2mm, 8mm/6mm, etc.) which can be the limiting factor.

Some dual concentric sets have a bottom knob with a recessed area for the top knob to sit in. Those ones work well for something shorter. I've used these in the past on a 6.4/3.2mm dual concentric pot.

https://www.amplifiedparts.com/products ... 9-diameter
User avatar
CraigBeckGuitar
Posts: 65
Joined: Thu Sep 26, 2019 3:18 pm

Re: Low Profile Dual Tone/Volume Knobs

Post by CraigBeckGuitar »

Thanks for the link. I will check these out.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest