So I have this kind of 50s Les Paul Special-inspired guitar with out of phase P-90s, and i had the idea to put in a 4-way blade switch so I could have out-of-phase in series as well as parallel. I looked into it and decided it would work, following the route you'd take with a tele, by separating the ground from the neg wire (but on the bridge) and leaving the neck as is, becuz it's a Lollar with a firbreboard base and just pos and neg with no ground.
I started with this:
and adapted it to this:
Evidently I'm doing something wrong, as it doesn't work, but i can't see what!
complicated guitar switching woes - 4-way LP style?
Moderator: The Captain
- simonm
- Posts: 983
- Joined: Fri Aug 29, 2008 12:01 am
- Location: East London, UK
complicated guitar switching woes - 4-way LP style?
Handmade, high-impact, great-looking radical queer germanium fuzz. A different approach to 1960s-inspired fuzz pedals, no clones, check them out at https://goodfuzzysounds.com or on YouTube https://tinyurl.com/GFS-YT
Who is online
Users browsing this forum: No registered users and 4 guests