RR10 Amplitude Booster

Tonal shaping & volume boosting delivered with germanium love.

Moderator: The Captain

Post Reply
User avatar
Fuzzz
Posts: 1552
Joined: Wed Nov 02, 2011 8:49 pm

Re: RR10 Amplitude Booster

Post by Fuzzz »

so are these going to be the new Rooster or a different flavour like the FR70/69?? :captain:
Logic should not interfere with determination
Sanitarium
Posts: 68
Joined: Tue Feb 28, 2012 5:43 pm

Post by Sanitarium »

I think it will be pretty much the same...probably is a different flavour as you said...same function...same 2 wonderful knobs...I wander if it can be powered in daisy chain with the others...
User avatar
The Captain
Posts: 7014
Joined: Tue Aug 26, 2008 12:05 am
Location: UK, Earth

Re: RR10 Amplitude Booster

Post by The Captain »

Same shit different box. Basically I was trying out using a Hammond made enclosure again, like on the first Roosters I made. I changed the sub-heading to 'amplitude booster' in case I continue with the enclosure type so it frees me up to make silicon versions as and when requested/required.
I started the numbering from #000 on these due to the above and also that I would be making these units myself. The only circuit change on these units that went to DSM was the addition of 470 ohm resistor tied on the boost pot, so that when the boost control is zero'd there is still a slight signal pass. All had Mullard OC82DM's and were mid to high gain types.
User avatar
mjkk
Posts: 2524
Joined: Mon Mar 08, 2010 7:11 am

Post by mjkk »

What OC82DM's.. I know I should have bought one!
"Yes I remember a brave guy named Roger dancing around musicians and cleaning their shoes. Occasionally we gave him our broken pedals for repair to get peace for some hours."
User avatar
jetofuj
Posts: 3527
Joined: Thu Sep 24, 2009 3:46 pm
Location: PL

Post by jetofuj »

Yep, this might be super cool transistor for a dirty booster...
User avatar
cajone5
Posts: 893
Joined: Fri Mar 11, 2011 8:04 pm
Location: Austin, TX

Post by cajone5 »

Dammit
Timing has a lot to do with the outcome of a rain dance.
User avatar
Laundromat
Posts: 2673
Joined: Wed Mar 18, 2009 4:13 pm
Location: Finland

Re: RR10 Amplitude Booster

Post by Laundromat »

The Captain wrote: The only circuit change on these units that went to DSM was the addition of 470 ohm resistor tied on the boost pot, so that when the boost control is zero'd there is still a slight signal pass.
I like your style, Dude. :cowboy:
Condolences, the bums lost!
User avatar
Fuzzz
Posts: 1552
Joined: Wed Nov 02, 2011 8:49 pm

Re:

Post by Fuzzz »

mjkk wrote:What OC82DM's.. I know I should have bought one!
Yeah, that would be sweet I'm sure!

Can't wait for a Si Rooster as well now - hope its something in the near pipeline! :popcorn:
Logic should not interfere with determination
User avatar
Markoni
Posts: 227
Joined: Sat May 12, 2012 10:52 am
Location: Warwickshire

Re: RR10 Amplitude Booster

Post by Markoni »

they make a lovely couple :badlove:

Image
User avatar
Funky Druid
Posts: 1095
Joined: Sun Jan 23, 2011 10:05 am
Location: PL

Post by Funky Druid »

Gut shot please!
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests