Old Fender deluxe reverb tube question
Moderator: The Captain
- pothole
- Posts: 988
- Joined: Sat Apr 10, 2010 5:51 am
- Location: b o i s e
Old Fender deluxe reverb tube question
So my 6v6 power tube sockets are loose to the point whenever I transport the amp, they fall out. I'm going to get some tube retainers/clamps to keep them in place but my question is the fact they are falling out during transport an indication the actual tube sockets should be pinched or tightened as well, or are the retainers good enough? The amp functions fine and sounds great. If anyone has some insight, let me know. Thanks,
- Dr Tony Balls
- Posts: 2337
- Joined: Wed Aug 17, 2011 3:42 pm
- Location: Brooklyn
Re: Old Fender deluxe reverb tube question
Yes. You should tighten the sockets so they make better contact with the pins. You can use a small screwdriver or dental pick to do this, but please check first that all of the sockets are free from any voltage. Retainers should also be used.
- pothole
- Posts: 988
- Joined: Sat Apr 10, 2010 5:51 am
- Location: b o i s e
Re: Old Fender deluxe reverb tube question
Thanks for confirming Doc, appreciate it!Dr Tony Balls wrote: ↑Wed Feb 14, 2024 5:43 pmYes. You should tighten the sockets so they make better contact with the pins. You can use a small screwdriver or dental pick to do this, but please check first that all of the sockets are free from any voltage. Retainers should also be used.
- Rygar
- Posts: 777
- Joined: Wed Jul 14, 2010 2:26 am
- Location: Northeastern U.S.
Re: Old Fender deluxe reverb tube question
Are they JJ tubes?
I've had some JJ tubes with pins that were smaller diameter than normal. Not good for old loose sockets.
I need a work light and a big magnifier when checking tube sockets these days. I want to get one of those usb microscopes.
I've had some JJ tubes with pins that were smaller diameter than normal. Not good for old loose sockets.
I need a work light and a big magnifier when checking tube sockets these days. I want to get one of those usb microscopes.
- pothole
- Posts: 988
- Joined: Sat Apr 10, 2010 5:51 am
- Location: b o i s e
Who is online
Users browsing this forum: No registered users and 1 guest